COPPER SULFATE CRYSTALS

25% copper

Water soluble fertilizer for Hydroponic and Fertigation solutions.

For constant feeding and hydroponic systems, the range in common nutrients solutions is 0.01-0.1 ppm copper.

To make a concentrated liquid stock solution. Add 0.15 grams to one liter final volume water. Then use this stock solution at 1 mL-10mL per gallon of working strength solution. This use rate(1-10mL/gallon) gives 0.01 to 0.1 ppm copper in the working solution.

When this product is used as a feed or fertilizer ingredient:

Guaranteed Analysis:

Copper (Cu) = 25.0% Derived from Copper Sulfate

• fines
• feed grade
• re-closable plastic wide mouth container
• label
• safety data sheet

ACTIVE INGREDIENT BY WEIGHT COPPER SULFATE PENTAHYDRATE………………………………… 99.0%

OTHER INGREDIENTS(anti-caking agent MgCaCO3)……………………………………………………………. 1.0%

TOTAL ……………………………………………………………………… 100.0%

CAS #7758-99-8

COPPER AS METALLIC NOT LESS THAN 25%

For non-pesticidal uses of copper sulfate including but not limited to:

• For Non-Pesticidal Manufacturing and Industrial Uses.
• For manufacturing, repackaging, formulation of algaecides and fungicides.
• For use as foot baths to control hoof rot in cattle.
• For use in preparing Bordeaux mixture.
• For use as a trace mineral for mixing in animal feeds at levels in accord with good feeding and feed manufacturing practices.
• For use as a fertilizer trace mineral for plant growth and used in accord with recommended agronomic practices.

(NOTE: For the states of Wisconsin, California, Oregon and Washington fertilizer recommendations and information, refer to back panel.)

KEEP OUT OF REACH OF CHILDREN

DANGER - PELIGRO

BORDEAUX SPRAY MIXTURE

Understanding Bordeaux Formulations:

If the Bordeaux mixture instructions read 10-10-100, the first figure indicates the number of lbs of Copper Sulfate Crystals. The second figure is the lbs of hydrated spray lime and the third figure is the gallons of water to be used. Use as a full coverage spray to point of runoff.

Preparation of Bordeaux Spray Mixture:

Fill a tank 1/4 full with water. Then, with agitator running, mix in Copper Sulfate Crystals through a copper, bronze, stainless steel or plastic screen. Add water so the tank is 3/4 full. Mix in the hydrated spray lime through the screen and finish filling the tank with water.