m menu image  m home m cart

Manufacturers

Sponsors



Acceptance Mark


Rootshield pluss

Nature's Source

HydroBuddy

triathalon BA


Details

Description

Directly inject fertilizer and acid without the need to mix in reservoirs. Program custom feed schedules for up to 32 rooms.  Dose up to 7 independent nutrients directly into irrigation lines. 
 
These systems are professionally installed by Hanna Instruments technicians with many customizable options.  
 
Hanna Instruments will directly handle the custom design work, shipment, installation, training, and routine service. 
 

Combined Fertigation and Irrigation Control.

The Hanna Fertigation System continuously measures the actual EC and pH of the flow-through and precisely adjusts the concentration of fertilizer into the system.

Injecting multiple fertilizers to a specific conductivity results in an optimum nutrient application while advanced pH control improves nutrient absorption and plant health.

For peace of mind, the HI10000 is a bypass system which will not interfere with mainline flow and thus does not impede line flow or pressure. No pressure loss generated by the system means less watering time. 

The unit will accurately inject fertilizer in varying flow rates ranging from 1 GPM to 350 GPM. Custom configuration is possible when higher flow rates are desired.

 

  • Superior System Design.

    The HI8000 series controller included with the system has 10 programs that allow the user to set various EC and pH values for a variety of crops.

    The system also controls up to 32 irrigation valves, either sequentially or in groups of 2, 3, or 4 at once. Programs can be triggered by time, external switching, or flow.

    To keep plants safe, the HI10000 fertigation system features multiple alarms and redundant monitoring of conductivity and pH measurements.

     

    Ideal for Complex or Multiple Fertilizer Mixes.

    The HI10000 system allows the injection of 4 (up to 7) independent fertilizers and 1 acid. The acid system can safely inject any acid type and uses a state of the art algorithm that accurately maintains the pH setpoint over a wide range of flow rates.

  •  

     

    pH

     

     

    pH Range

     

     

    0.0 to 14.0 pH

     

     

    pH Resolution                                                    

     

     

    0.1 pH

     

     

    pH Accuracy

     

     

    ±0.0546 pH

     

     

    EC/TDS

     

     

    EC Range

     

     

    0.0 to 10.0 mS/cm

     

     

    EC Resolution                                                               

     

     

    0.1 mS/cm

     

     

    EC Accuracy

     

     

    ±0.078 mS/cm

     

     

     

    Electrical Requirements

     

     

    Controller Power Requirements                      

     

     

    115V/220V; 50Hz/60Hz. 10 Amp, 4 outlet box recommended

     

     

    Circulator Pump Solenoid Array Power Requirements

     

     

    208/240, 3 phase, 30 Amp breaker

     

     

    Plumbing Requirements

     

     

    Pressure Requirement (PSI)

     

     

    Maintained at fixed pressure between 50 to 65 PSI

     

     

    Minimum Flow Rate

     

     

    1.0 GPM

     

     

    Maximum Flow Rate                                                                 

     

     

    350+ GPM (dependent on various factors)

     

     

    Pipe Type Recommendations

     

     

    Schedule 40 or 80 PVC

     

     

    Minimum Pipe Diameter Recommendation

     

     

    1.25 inch (1.0 inch for HI10000 (low flow))

     

     

    Straight Run Requirement

     

     

    10 diameters of straight run prior to system connection, 5 diameters after (downstream)

     

     

    Fertigator In/Out Connections

     

     

    2x8 bolt, 4-inch flange fitting with gaskets

     

     

     

     

    System

     

     

    Typical Inputs

     

     

    3 Conductivity Probes, 2 pH Electrodes, 4 Fertilizer Tank Level, 1 pH Tank Level, 5 External   Tank Trigger, 1 Mix Tank Level, 2 Differential Pressure, 1 Irrigation Counter for Volume Control, 1 Temporary Break, 1 Conditional Stop

     

     

    Typical Outputs

     

     

    2 non-consent alarms, 32 zone valves, 2 filter flushing, 1 pump, 1 agitator, 4 independent fertilizer injectors, 1 pH injector

     

     

    Control Type

     

     

    Advanced Auto Tuning PID

     

     

    Max. Injector Suction

     

     

    Large Venturi = 780 l/h; Small Venturi = 280 l/h

     

     

    Irrigation Capacity

     

     

    32 Zones (24 VAC 0.5 Amp Solenoid Valves)

     

     

    Irrigation Control

     

     

    Time/Volume Control, 1 to 6 selectable timetables per program

     

     

    Readout

     

     

    20-digit, 4 level LCD with graphic symbols and messages

     

     

    Program Method

     

     

    With keypad or through a PC using proprietary software

     

     

    Alarms

     

     

    Dual Alarm Settings for redundant shut down capability plus third external independent EC safety system

     

     

    Control Power Requirements

     

     

    115V/220V; 50Hz/60Hz, 5 Amp

     

     

    CirculatorPump/Solenoid Array Power Requirements

     

     

    208/240, 3 phase, 30 Amp Breaker

     

     

    Circulator Pump

     

     

    End Suction Centrifugal 208/240 VAC, 3 Phase, 1 to 2.0 HP (exact size dependent on design specifications)

     

     

    Transformer

     

     

    400 VA, 16 Amp Capacity, 208/240 - 24 VAC

     

     

    Electrical Panel Assembly

     

     

    Equipped with high voltage breaker arrays, 24 amp, pump motor starter with thermal protection, 32 fused zone contacts, EC safety system, electrically latched, thermal safety switch (at 40°C)

     

     

    Dimensions

     

     

    L= 46.5 in. / W= 30.75 in. / 70.0 in.

     

     

    Operating Temperature

     

     

    40°F to 95°F Recommended

 




This product was added to our catalog on Thursday 19 April, 2018.