Fertilizer Solubility Table

SOLUBILITY OF FERTILIZERS FOR FERTIGATION SOLUTIONS

The solubility of a fertilizer is determined as the maximum amount that can be completely dissolved into a determined volume of water. Exceeding this maximum amount will result in precipitation of the fertilizers in the irrigation system and can be a very serious problem with clogging of small orifices with in the fertigation system.

The solubility is expressed in units of weight per volume of water. For example: grams/liter or lb/gallon. Our table lists grams per 100 milliliters.

The solubility of each fertilizer is dependent on the temperature of the water in which it is being dissolved. The solubility of most fertilizers increases with the temperature. Therefore, at lower temperatures, the fertilizer stock solutions must be more diluted. At higher temperatures, more concentrated stock solutions can be prepared, but when the solution cools the maximum solubility falls in conjunction. So for example, you can not dissolve 78 grams of ammonium sulfate in 100 milliLiters of 80 degree water and then cool it to 60 degreees with out 5 grams of amonium sulfate precipitating out of solution, because the max solubility of ammonium sulfate at 60 degrees is only 73 grams per 100 milliLiter.

Theoretical Maximum Solubility of Fertilizer Compounds, grams/100 mL

Fertilizer Compound- Common Name 60° farenheit 70° f 80° f
Ammonium Sulfate- Solugreen 73 g/100ml 77 g/100ml 78 g /100ml
Ammonium Phosphate monobasic-NovaMAP 30 37 46.4
Boric Acid- Optibor 3.49 4.72 6.23
Borate, Disodium Octa- Solubor 4.79 10.78 27.5
Calcium Chloride anhydrous- Vitro 64.7 74.5 100
Calcium Sulfate solution grade- Valufil 0.244 0.255 0.264
Calcium Nitrate -Yaraliva 95 120 150
Calcium Nitrate- Haifa Cal PRIME 114 121.3 164
Copper EDTA 15% 40
Copper Sulfate 27.5 32 37.8
Iron EDDHA 6% 5 6 7
Iron DTPA 10% 10 11 12
Iron Sulfate 20% 20 30 40
Magnesium Nitrate- Magnific 220 240 270
Magnesium Sulfate EPSOM- Magriculture 61 71 91
Magphos 40
Manganese EDTA 13% 80
Manganese Sulfate 59.7 62.9 62.9
Potassium Hydroxide 103 112 126
Potassium Nitrate- Krista K 21 31 45
Potassium Phosphate monobasic, MKP 18 23 29
Potassium bisPhosphate, PeKacid 67
Potassium Silicate- Agsil 16h 13 15 16
Potassium Sulfate- Ultrasol SOP52 8 10 11
Sodium Molybdate 64.7 65.3 66.9
Zinc EDTA 14% 100
Zinc Sulfate 47.2 53.8 61.3

Data for this table was taken from product tech sheets and msds.

The information offered in this table is a guide and it is recommended growers seek further assistance when dealing with specific fertilizer mixes and blends.

 

The common ion effect is a decrease in the solubility of an ionic compound as a result of the addition of a common ion.

Adding calcium ion to a saturated solution of calcium sulfate causes additional CaSO4 to precipitate from the solution, lowering its solubility. The addition of a solution containing sulfate ion, such as potassium sulfate, would result in the same common ion effect. So although two fertilizer materials may be compatible in the same tank, if they contain a common ion, each of their respective maximum solubilities is lowered when combined in the same tank.